Silvercrest SEMM 1470 A1 - Setting the Milk Nozzle

GB
│
IE
│
NI
│
13 ■SEMM 1470 A1
Setting the milk nozzle
For cappuccino and latte macchiato you will need to adjust the milk nozzle 
depending on the cup size.
1) Swing the milk nozzle  so that it is pointing into the glass/cup. Always
use the milk nozzle lever + to position the milk nozzle .
2) Turn the silver attachment on the milk nozzle  a little to the rear so that it is
released.
3) Depending on the size of the glass/cup, push the silver attachment on the
milk nozzle  downwards a little (or upwards, depending on its previous
position). The milk nozzle  should extend down into the glass/cup to
prevent splashes. You can choose between 3 heights.
4) Once you have selected a height, turn the silver attachment on the milk
nozzle  back to the front so that it clicks into place and no longer moves.
For the purpose of clarity, the adjustment of the milk nozzle  is shown here
with the milk tank  removed. There is, however, no need to remove the milk
tank  from the appliance if you want to adjust the length of the milk nozzle .