Silvercrest SFM 2400 A1 - Page 44

44 GB/IE
LED indicator for low battery and DPI status
1. When battery power is low, the LED indicator will
light up in red, please replace the batteries with new
batteries.
2. Press DPI button to change its DPI level. The LED
indicator will flash according to its DPI level:
– Flash1x= 800DPI
– Flash2x= 1600DPI
– Flash3x= 2400DPI
Power saving mode
This wireless mouse supports power saving mode for
saving the battery charge. The wireless mouse will shut
down automatically if any one of the following scenarios
occurs:
1. After your computer has shut down. The mouse will
be activated after your computer is turned on again.
2. After the USB dongle has been unplugged from your
computer. The mouse will be activated after the USB
dongle is connected to the computer again.