Silvercrest SFR 37 B1 - Page 13

11
GB
• When the battery is fully charged, the device can be used
for approximately 90 minutes without being connected to the
power supply.
1. Switch off the device with the on/off switch|6 if necessary.
2. Connect the plug-in power unit|17 to the socket|11 on the
device.
3. Insert the plug-in power unit| 17 into an easily accessible wall
socket, the voltage of which corresponds to the rating plate.
4. The charging indicator|8 flashes and the battery is charged.
When the battery is fully charged, 100% is shown and the
charging indicator|8 is lit.
BB%50B%ERRN6HLWH0LWWZRFK0DL