Silvercrest SFR 37 B1 - Operation; Before Switching on for the First Time; Switching on and off

12
GB
6. Operation
6.1 Before switching on for the first time
CAUTION:
~ After unpacking, there could still be oil residues on the shav-
ing foils. Remove these with an absorbent, lint-free cloth be-
fore using the device for the first time.
6.2 Switching on and off
Irrespective of the battery’s charging status, the device can be
used at any time in mains operation.
1. In order to use the power pack, ensure that the device is
switched off.
2. Connect the plug-in power unit|17 to the socket|11 on the
device.
3. Insert the plug-in power unit|17 into an easily accessible
wall socket, the voltage of which corresponds to the rating
plate.
4. Remove the protective lid|14 before switching on.
5. To switch on the device, push the on/off switch|6.
6. When switching on ...
… the charging state is shown,
… the cleaning symbol|12, the plug symbol|9 and the lock
symbol|10 appear briefly on the display.
7. To switch off the device, push the on/off switch|6 again .
BB%50B%ERRN6HLWH0LWWZRFK0DL