Silvercrest SGP 230 A1 Translation Of The Original Instructions For Use

IEGB
Translation of the original instructions for
use
Electric blower pump SGP 12 A1
Intended use
The appliance is designed for inating and deating inatable mattresses, rubber dinghies,
swimming pools and other inatable high-volume articles for domestic use.
Do not use it to inate bicycle or car tyres.
Every other use may damage the appliance and cause a serious risk for its users.
The manufacturer shall not be liable for damages caused by non-intended or inappropriate
operation.

Silvercrest SGP 230 A1 Specifications

General

Power consumption	230 W
Max. immersion depth	7 m
Max. particle size	5 mm
Water temperature	35 °C
Cable length	10 m
Protection type	IPX8
Voltage	230 V
Frequency	50 Hz