Silvercrest SGP 230 A1 - Page 9

IE
9
GB
5. When enough air is in the article turn off the appliance (move On/Off switch to
“0”) and unplug the valve adapter (6).
6. Restore the cap to the valve of the inatable article.
Deating
1. Install the correct valve adapter (6) by pushing it over
the pump’s air inlet labelled DEFLATE (1).
2. Remove the cap from the valve of the inatable article
and plug the valve adapter (6) into the valve of the
inatable article.
3. Turn on the appliance (move On/Off switch to “I”).
4. When all the air has been removed from the inatable
article, turn off the appliance (move On/Off switch to
“0”) and unplug the valve adapter (6).
6
1