Silvercrest SH-100
139
If you want to change the PIN and SIM Lock is not enabled, the
PIN cannot be changed. The message: “SIM Lock must be
enabled!” appears and an error signal is sounded.
Note: The password must contain a minimum of four
characters and should not exceed eight characters.
21.7 Restore Factory Settings
Open the “Restore Factory Settings” submenu. In this menu you
can reset all main settings to the original factory settings. The
phone is reset by pressing the menu or call key. Press the C key
to cancel.
Note: To restore the factory settings, the correct phone lock
To Next Page
Loading...