Silvercrest SHAC 2100 B1 - Cleaning

GB
│
IE
│
21 ■
SHAC 2100 B1
Cleaning
RISK OF ELECTRIC SHOCK
► Always remove the mains plug from the socket before you clean the appliance.
► Under no circumstances may you immerse the appliance in water or other
liquids when cleaning it!
► After being cleaned, the hair dryer must be completely dry before using it
again.
WARNING! RISK OF PHYSICAL INJURY!
► Allow the appliance to cool sufficiently before cleaning it.
CAUTION! PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents. They could damage
the surface.
Cleaning the housing
■ Use a soft cloth lightly moistened with a mild soap solution to clean the housing
and attachments.
Cleaning the air suction grill
WARNING! RISK OF FIRE!
► Clean the air intake grill 2 at regular intervals with a soft brush.
4) Turn the air intake grill 2 a little way anticlockwise so that it can be removed
from the hair dryer.
5) Clean the openings of the air intake grill 2 with a soft brush.
6) Push the air intake grille 2 back onto the hairdryer so that the tabs on the
air intake grille 2 click back onto the recesses on the hairdryer. Turn the air
intake grille 2 clockwise a little way so that it clicks into place and sits tightly.
Storage
CAUTION! PROPERTY DAMAGE!
► First pack and transport the hair dryer when it has completely cooled down.
Otherwise, it could damage other items.
■ Clean the hair dryer as described in the section „Cleaning“.
■ For storage purposes, you can hang the hairdryer up by the suspension
loop 3.
■ Store the hair dryer at a dustfree and dry location.