SHAZ 22.2 F7
■ 12
│
GB
│
IE
4) Drill the marked holes with a 5-mm drill.
5) Push the supplied wall plugs
z into the holes.
6) Screw the wall bracket
i in place using the screws t provided.
7) Connect the mains adapter
0 to a mains socket.
Getting started
Information about the battery
♦ The vacuum cleaner is powered by a rechargeable, replaceable lithium-ion
battery. Before using the vacuum cleaner for the first time, the battery 2
must be charged for around 6 hours.
♦ To care for the battery
2, we recommend the following:
Disconnect the mains adapter 0 from the mains socket after the battery 2
is charged.
Note
► The appliance is equipped with a temperature monitor to protect the battery 2.
At high ambient temperatures, the charging process may be interrupted or
the appliance may switch off automatically in rare cases:
– The battery indicator
j flashes at one second intervals during charging.
Charging is interrupted and automatically resumed as soon as the
temperature of the appliance has dropped.
– The battery indicator j flashes five times at one second intervals during
operation. The appliance switches off automatically. Allow the appliance
to cool down for about 20-30 minutes before switching it on again.
To Next Page
Loading...
