SHAZ 22.2 F7
■ 16
│
GB
│
IE
Switching the appliance on
1) Remove the vacuum cleaner from the wall bracket i. When you are not
using the wall bracket i, pull the barrel plug q out of the charging
socket 3 on the underside of the appliance.
2) Press the On/Off switch
l to switch on the appliance. The display
panel k shows the battery indicator j and operating mode h (Eco/
Boost).
Note
► The appliance always starts in operating mode Eco after being switched on.
Selecting an operating mode
The appliance has two different operating modes, each of which differs in terms
of suction power and running time. Press the y button to select the
operating mode:
Eco
– For vacuuming hard floors, delicate carpets and rugs with low to medium
soiling.
– The appliance consumes less battery power and the running time is
therefore longer.
– Running time with fully charged battery approx. 45 minutes.
Boost
– For vacuuming hard floors and carpeting with heavy soiling
– Due to the high suction power, the best suction result is achieved with
a short running time.
– Running time with fully charged battery approx. 25 minutes.
To Next Page
Loading...
