8
GB
~ Only connect the power unit to a properly installed,
easily accessible wall socket, the voltage of which cor-
responds to the specifications on the rating plate. The
wall socket must continue to be easily accessible after
the device is plugged in.
~ Ensure that the cable cannot be damaged by sharp
edges or hot surfaces.
~ Ensure that the cable is not trapped or crushed.
~ When removing the power unit from the wall socket,
always pull the power unit and never the cable.
~ Pull the power unit out of the wall socket, …
… after every use,
… after each charging process,
… if there is a fault,
… before connecting the device to the cable,
… before you clean the device and
… during thunderstorms.
~ To avoid any risk, do not make modifications to the de-
vice. Repairs must be carried out by a specialist work-
shop or the Service Centre.
DANGER from batteries
~ Protect the battery against mechanical damages. Fire
hazard!
~ Do not expose the device to direct sunshine or heat.
The ambient temperature should not be lower than
-10 °C and higher than +40 °C.
~ The charge contacts on the device must not be connect-
ed by metallic objects.
~ The
battery
may only be charged with the original ac-
cessory (power unit).
__NAS281952_Haar_und_Bartschneider_5in1_B6.book Seite 8 Dienstag, 11. Oktober 2016 4:10 16
To Next Page
Loading...
