■ 10
│
GB
│
IE
│
NI
│
CY
SHFR 1450 A1
– Fill the cooking container with the food you want to cook. Do not
exceed the MAX marking in the cooking container .
– If required, sprinkle a suitable cooking oil evenly over the food. To do
this, use the measuring cup 3 and do not exceed the MAX marking on
the measuring cup 3 (35 ml).
■ If you want to use the cooking grill :
– Remove the stirrer and the stand - (if present) from the cooking
container .
– Place the cooking grill centrally in the cooking container and
place the food on the cooking grill .
– Select the programme “Manual 3”
: this uses the upper heating
element only and not the stirring function.
5) Close the lid .
6) Choose a suitable programme, as described in the section Before first use.
Press the ON/OFF button to start immediately or adjust the time and
temperature according to your needs:
– Press the SET button ; the time display flashes.
– Use the arrow buttons ▲ ▼ to set a suitable time.
– Press the SET button again and the temperature display
flashes.
– Use the arrow buttons ▲ ▼ to set a suitable temperature.
NOTE
► The possible setting range for temperature and time varies depending on
the programme. See the table in the section Programmes.
7) Press the ON/OFF button to start the cooking process. The display
lights up orange during operation.
Depending on the programme, the heating elements, the stirrer and
ventilation start working.
NOTE
► The upper heating element may switch off occasionally during use. This
means that the temperature required for the cooking processing has been
reached. After a short time, the heating element switches back on and
resumes heating.
8) When the programme is completed, you will hear ten beeps and the display
lights up blue. The appliance is back in standby mode. The ventilation in the
lid runs on for a while to cool down the appliance.
To Next Page
Loading...
