EasyManua.ls Logo

Silvercrest SHGB 50 A1 - Disposal; Troubleshooting; Technical Specifications

Silvercrest SHGB 50 A1
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
GB
8. Disposal
This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances. Re-
cycling helps to reduce the consumption of
raw materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
9. Troubleshooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric shock!
~ Do not attempt to repair the device
yourself under any circumstances.
10. Technical
specifications
Subject to technical modification.
Fault
Possible causes /
Action
None
Function
Has the device been
connected to the
power supply?
Error messages
on the display
(E1, E2, E3, E4)
1. Disconnect the mains
plug|1 from the wall
socket.
2. Allow the device to
cool down.
3. Connect the mains
plug|
1
with the wall
socket and put the de-
vice into operation. If
the device cannot be
switched on, contact
the Service Centre.
Model: SHGB 50 A1
Mains voltage: 220-240 V ~50/60 Hz
Protection class: II
Power rating: 50 W
BB1$6B+DDUEXHUVWHB%ERRN6HLWH'RQQHUVWDJ2NWREHU

Related product manuals