SilverCrest SHSD 2600 A1
English - 27
2. Package contents
Remove the hot water dispenser and all the accessories from the packaging. Remove the
packaging material and check that all components are complete and undamaged. If you find
anything missing or damaged, please contact the manufacturer.
A SilverCrest SHSD 2600 A1 hot water dispenser
B Water reservoir
C Holder filter
D Reset key
E Catcher plate
F These operating instructions (not shown)
3. Components list
These operating instructions have a fold-out cover. On the inside of the cover is a diagram of the
SilverCrest SHSD 2600 A1 hot water dispenser with all its control elements numbered. You can
keep this page folded out whilst reading the different chapters of these operating instructions. This
allows you to refer to the relevant controls at any time. The meanings of the numbers are as follows:
1 Temperature display
2 Volume display
3 Start button
4 Water volume button
To Next Page
Loading...