EasyManua.ls Logo

Silvercrest SKBO 35 A1 - Active Noise Cancellation; Disconnect;Interrupt a Bluetooth Connection; Functions of the Buttons

Silvercrest SKBO 35 A1
244 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
GB
7.4 Disconnect/interrupt a
Bluetooth connection
If you switch off the headphones, the
connection to the audio device will tem-
porarily be interrupted.
Briefly press the13 button twice to dis-
connect the current connection between
the smartphone and the headphones.
Pairing is restarted.
In order to permanently disconnect the
Bluetooth system from the audio device,
delete all Rhythm Blast On-Ear ANC en-
tries in the device list on the player.
7.5 Functions of the buttons
WARNING! Risk of hearing
damage!
~ If the listening volume is too loud, this
can cause hearing damage! In order to
prevent possible damage or loss of hear-
ing, avoid listening at high volume levels
for long periods of time.
NOTES:
When the maximum adjustable volume
is reached, the headphones will beep.
The buttons are only active with a Blue-
tooth connection, not when using a ca-
ble.
Operation may vary depending on the
device type, software version and app
.
You can perform the following functions with
the buttons on the headphones:
7.6 Active noise cancellation
The headphones feature active noise cancella-
tion (ANC: Active Noise Cancellation). This
means that the ambient noises have been
cleared by specifically generated counter-sig-
nals.
The noise cancellation only works when it
is switched on.
Briefly press the NC14 button to switch
on the function. The LED15 is lit white.
An acoustic signal sounds.
If the function is switched on, briefly press
the NC14 button to switch the function
off. The LED15 goes out. A triple acous-
tic signal sounds.
Button Function
Button13
Press for approx. 3 sec-
onds: Switching on/off (au-
dio signal)
O6
During playback:
Press briefly: pause / play
Press briefly 3x: activate
the voice assistant of the
connected smartphone
During a call:
Press briefly: pick up / end
call
Press briefly 2x: redialling
Press long: reject call
+5
Press briefly: increase the
volume
Press long: next song
7
Press briefly: reduce the
volume
Press long: beginning of a
song
•Press 2x long: previous
song
NC14
Press briefly: switch on ac-
tive noise cancellation
(ANC)
Press briefly again: switch
off ANC and switch to Am-
bient Aware
Press briefly again: switch
off Ambient Aware
__411188_2201_B8.book Seite 25 Mittwoch, 21. September 2022 12:50 12

Table of Contents

Related product manuals