Cassette Digitizer SilverCrest SKD 1000 A3
English 123
The recording window is then displayed.
3. Insert the cassette that you wish to digitize and then press the PLAY button (10) to start
playing the tape. Adjust the volume using the Volume Control knob (2) on the device as
described in the "Input Level" option (see Step 4 below).
Use the FF button (8) or the REW button (9) to spool to the start of the tape or to
find the track that you wish to digitize.
Make sure that the correct recording console is configured in the AudioLava
software. Select "Options", then "Device Settings", and in "Recording Console"
select the "[MME] Microphone Array (2-USB PnP Audio)" option. Under
Windows XP this entry reads "MME (USB PnP Audio Device)".
To Next Page
Loading...
