EasyManua.ls Logo

Silvercrest SKKM 200 A1 - Safety Instructions; Risk of Electric Shock

Silvercrest SKKM 200 A1
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
IE
 3
SKKM 200 A1
Safety instructions
RISK OF ELECTRIC SHOCK
Connect this appliance only to correctly installed mains power
sockets supplying a mains voltage of 220 240 V ∼, 50–60Hz.
To avoid potential risks, if the appliance power cable is damaged, it
must be replaced by the manufacturer, its customer service or by a
qualified technician.
In event of operating malfunctions and before cleaning the
appliance, remove the plug from the mains power socket.
Always remove the power cable from the socket by pulling on the
plug, not on the power cable itself.
Do not crimp or crush the power cable, and route the cable so that
it cannot be stepped on or tripped over.
The appliance must not be exposed to moisture or used outdoors.
If the housing is penetrated by liquid, disconnect the appliance from
the mains power socket immediately and have it repaired by a
qualified technician.
Never touch the appliance, the power cable or the power plug with
wet hands.
All repairs to the appliance must be carried out by authorised specialist
companies or Customer Service. Improper repairs may put the user at
risk. They will also invalidate any warranty claim.
Do not open the housing of the appliance motor unit. Should you do
so, the safety of the appliance is no longer assured and the warranty
will become void.
Disconnect the appliance from the mains power source immediately
after use. The appliance is completely free of electrical power ONLY
when unplugged.
Never immerse the appliance in water or other liquids!

Table of Contents

Related product manuals