■ 8
│
GB
│
IE
│
NI SMA 500 A1
Disposal of packaging
The packaging protects the device from transport damage.
The packaging materials have been selected in accordance
with their environmental friendliness and disposal attributes,
and are therefore recyclable.
The recirculation of packaging into the material
circuit saves on raw material and reduces the
amount of waste generated. Dispose of
packaging material that is no longer needed in
accordance with applicable local regulations.
Requirements for the setup location
For safe and trouble-free operation of the device, the setup
location must fulfil the following requirements:
■ The device must be placed on a firm, flat and level surface.
■ Do not place the device in a hot, wet or extremely moist
environment or close to flammable materials.
■ Set up the device so that it is not exposed to direct sun-
light or strong artificial light.
To Next Page
Loading...
