28 - English
has been set.
Example:
You would like to defrost some food using a defrosting programme and then start cooking
programme P50.
Set the defrosting programme as described in section “11.4. Defrosting programme” on
page 26 without subsequently pressing the
start button (13).
Set the P50 programme as described in section “11.2. Cooking programme” on page
25.
Then press the start button (13) to start the programmes. Both programmes run one
after another.
11.6. Automatic programme
It is not necessary to set the cooking time or power level for the automatic programme. The
product automatically determines the values depending on the foodstuff and weight input.
Turn the control knob (14) clockwise. A programme number appears on the display (3)
(e.g. “A-1” for automatic programme1).
Select an automatic programme from A-1 to A-8.
The corresponding symbol flashes on the display (3).
Press the start button (13) to confirm the selection.
Now select the desired weight. To do this, turn the control knob (14) until the desired
portion size is displayed.
The weight/amount is shown on the display (3).
The amount can be set according to the following table:
Program Weight Display Output
A-1 Heating
200 g 200
700 W400 g 400
600 g 600
A-2 Vegetables
200 g 200
700 W300 g 300
400 g 400
A-3 Fish
250 g 250
560 W350 g 350
450 g 450
A-4 Meat
250 g 250
700 W350 g 350
450 g 450
A-5 Pasta
50 g
(+ 450 ml water)
50
560 W
100 g
(+ 800 ml water)
100
To Next Page
Loading...
