SPB 5.000 B1
■ 8 │ GB│IE│NI
LED display Charge level
One LED is flashing < 20%
One LED is on, the second LED is
flashing
20–49%
Two LEDs are on, the third LED is
flashing
50–74%
Three LEDs are on, the fourth LED is
flashing
75– 97%
All LEDs are on 98–100%
Checking the charge level
You can also check the charge level of the power bank when
it is not charged or while it is being used for charging.
♦ Press the ON/OFF button briefly. The LEDs show the
current charge level of the power bank for about 30 seconds.
LED display Charge level
All LEDs are on 98–100%
Three LEDs are on 75– 97%
Two LEDs are on 50–74%
One LED is on 20–49%
One LED is flashing < 20%
All LEDs off 0%
Handling and use
Charging mobile devices with the power bank
CAUTION
► When 2 mobile devices are charged simultaneously via
the Lightning connector
and the micro USB plug ,
the total power consumption of the connected mobile
devices may not exceed 2.1 A.
♦ Insert the Lightning connector
or the micro USB plug
into a suitable socket on the mobile device you want to
charge.
♦ Press the ON/OFF button once briefly to start the
charging process.
To Next Page
Loading...
