SilverCrest SPWD 180 H1
8 - English
If the battery has leaked, remove it to prevent damage to the
diagnostic scales. You can remove leaked battery fluid with
a dry, absorbent cloth. Wear suitable gloves for this
purpose! Contact with skin must be avoided. In the event of
skin or eye contact with chemicals, they must be immediately
rinsed with generous amounts of water and a doctor must be
consulted.
6. Copyright
All information contained in these instructions is subject to copyright and is provided for information
purposes only. It is only permitted to copy or duplicate data and information with the express and
written consent of the author. This also includes commercial use of the content and data. The text
and illustrations are based on the state of the art at the time of printing. Subject to change.
7. Prior to use
7.1 Activating the battery
Remove the strip from the battery compartment (7) on the
bottom of the diagnostic scales. The diagnostic scales are
now ready to use.
7.2 Entering or changing personal data
Make sure that the correct unit of weight is set before you enter your personal
data. Refer to the section "Switching on the scales / measuring weight".
You must enter your personal data when you first measure your body weight, recommended calorie
intake and body fat, water, bone and muscle percentages. To do so, proceed as follows:
Press the SET button (3) to switch on the scales.
The user profile memory (22) then flashes on the LCD display (1). Use the
▲ button (2) or ▼
button (4) to select the desired user profile memory (22) [1-12]. Confirm your selection using
the SET button (3).
To Next Page
Loading...
