Silvercrest SSBS 3.0 A1 - Operation and Usage; Attaching Smartphone; Extending Selfie Stick; Capturing Photos

SSBS 3.0 A1
■ 10
│
US-EN
Attaching the smartphone to the selfie stick
♦ Open the clamps on the smartphone holder2.
♦ Place the smartphone between the clamps on the smartphone
holder2 by pushing the top clamp apart against the spring
force. Make sure your smartphone is securely in place.
♦ Loosen the set screw3 and adjust the vertical tilt angle of
the smartphone. Fix the smartphone in the desired position
by re-tightening the set screw3.
♦ If necessary, attach the remote trigger8 to the first element
of the telescopic rod4 via the remote trigger holderr.
Taking selfies
♦ Unlock the telescopic rod4 by turning it counterclockwise.
♦ Now, pull out the telescopic rod4 to the desired length.
Turn the individual elements of the telescopic rod4 clock-
wise to lock them in place.
♦ If you want to loosen the telescopic rod4 again, turn the in-
dividual elements in the opposite direction (counterclockwise).
♦ Turn your smartphone’s camera function on.
♦ Press the
buttonq on the remote trigger8.
Your smartphone will take a picture. The power LED0
briefly flashes blue once.
If you do not press the buttonq for approx. 6 minutes,
the remote trigger8 automatically turns off.
Using the mini-tripod
♦ Screw the mini-tripod1 into the ¼ inch thread7 on the
bottom of the handle5.
♦ Always fold out the legs of the mini-tripod1 completely
for the best possible stability.