Silvercrest SSM 600 A1 Original Instructions And Safety Instructions

SilverCrest SSM 600 A1
English - 7
General safety instructions
Risk of electric shock!

The power cable (6) must not be damaged. Never
replace a damaged power cable (6), instead contact our
hotline (see "Warranty information" on page 21). There
is a risk of electric shock in the case of a damaged
power cable (6).
 Do not open the blender housing - it contains no
serviceable parts. Opening the housing can expose you
to the risk of electric shock.
 If you notice any smoke, unusual noises or strange
smells, switch off the device immediately and remove the
plug from the mains socket. If this occurs, do not continue
to use the device and have it checked out by an expert.
Never inhale smoke from a possible device fire. If you do
inadvertently inhale smoke, seek medical attention.
Smoke inhalation can be damaging to your health.
 Make sure that the power cable (6) cannot be damaged
by sharp edges or hot spots. After use, always wind the
power cable (6) back around the cord wrap (9)
underneath the motor unit (7).
 Make sure that the power cable (6) cannot become
crushed or squashed.
 The device must always be disconnected from the mains
when left unsupervised and before assembly,

Silvercrest SSM 600 A1 Specifications

General

Brand	Silvercrest
Model	SSM 600 A1
Category	Kitchen Appliances
Language	English