GB18
have to be synchronized in regard of the
encryption. Every transmitter is working
with a different encryption of the signal.
Synchronise the transmitter and
receiver as follows:
As soon as the batteries are installed,
the receiver enters synchronizing
mode for approx. 2 minutes. During
the synchronizing mode, the signal in-
dicator
1
steadily lights up in blue
color.
You can also manually enter syn-
chronising mode by holding the
synchronising button
3
for approx.
3 seconds.
The signal indicator
1
on the receiver
will steadily light up for approx.
1 minute, to indicate that the receiver
is in synchronizing mode.
Press the chime button
11
of the
transmitter, while the receiver is in
synchronise mode. If the receiver
receives the signal, the steady blue
To Next Page
Loading...
Need help?
General
