33US-EN
LED status
LED Status
Flashes red/white Waiting for Bluetooth device to pair
Flashes white Headphones paired with Bluetooth device
NOTICE
If the headphones have already been paired to each
other, the right headphone is already connected to the left and flashes
white only.
Pairing the headphones to each other
To hear sound through both headphones in stereo, they must be paired to
each other.
When you remove the headphones from the charging ports[8], they
automatically pair.
If the headphones do not pair to each other, reset them to the default
settings (see “Resetting to default settings”).
When the headphones are paired to each other and are awaiting
connection to a Bluetooth device, one of the headphones flashes red/
white and the other headphone flashes white only.
401854_2107_US-EN_02.indb 33401854_2107_US-EN_02.indb 33 31/8/2021 17:1531/8/2021 17:15
To Next Page
Loading...
Need help?
General
