EasyManua.ls Logo

Silvercrest SWCD 1000 A1 - Operating the Appliance; Initial Setup and First Use; Attachment Fitting and Removal

Silvercrest SWCD 1000 A1
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
SWCD 1000 A1
GB
IE
WARNING! RISK OF INJURY!
Keep the air inlet and outlet openings clear so
as to have unimpaired air fl ow. Otherwise the
appliance may overheat.
Exercise caution when using hair spray, water
atomizers etc. The air fl ow may blow these
substances directly into your eyes. On the other
hand, these substances must not be allowed to
penetrate the appliance, since they may be in-
ammable, aggressive or electrically conductive.
First use
Before taking the appliance into use ensure that ...
the appliance and the attachments are in good working order,
all packaging materials have been removed.
Clean all of the attachments as described under “Cleaning and care”.
Attachment fi tting / removal
WARNING! RISK OF INJURY!
After operation, the appliance components may be hot!
Fitting Attachments
Insert the desired attachment into the attachment insertion slot 1, so that
the front arrow symbol on the attachment points at the arrow symbol on the
attachment insertion slot 1 .
Turn the attachment clockwise until it clicks into place. The back arrow on the
attachment now points at the arrow on the attachment insertion slot 1 .
IB_87966_SWCD1000A1_FI_SE_DK.indb 9IB_87966_SWCD1000A1_FI_SE_DK.indb 9 08.03.13 09:1008.03.13 09:10

Table of Contents

Other manuals for Silvercrest SWCD 1000 A1

Related product manuals