When the alarm sounds...
• and the “Radio” alarm function has been selected, the radio operates
for one hour at a predefined alarm volume. To switch off press the
Vol.+/AL–1 (or Vol.–/AL–2) button.
• and the “signal sounds” alarm function has been selected, the signal
sound is played for 10 minutes. To switch off press the
Vol.+/AL–1
(or Vol.–/AL–2) button.
Note:
Please take note that the last tuned radio station together with the last used
sound volume setting is used for the alarm call.
Interrupting the alarm
• Press the button SNOOZE to interrupt the alarm for 10 minutes (default
setting) (see also the section "Set snooze time").
Turning off the alarm function
• Press the Vol.+/AL–1 or Vol.–/AL–2 button until the relevant alarm symbols
disappear from the screen.
• The alarm function for the current day can be deactivated by pressing
any button (apart from
SNOOZE). The multi-band radio will then not switch
itself back until the next programmed alarm time.
- 20 -
GB/CY
To Next Page
Loading...
