Call up and activate the countdown function
• Press and hold down the MEMORY SCAN button for around 2 seconds,
the screen shows 0. 00 D.
• Select the desired, saved countdown time with the aid of the
M.0/5–M.4/9
memory buttons.
• Press
SNOOZE to start the countdown. Pressing the SNOOZE button again
pauses the countdown.
When the set time has been counted down, an alarm sound plays for one
minute becoming gradually higher in tone and louder.
• Press the
MEMORY SCAN button to pause the countdown and leave
countdown mode.
Radio operation
Switching on / volume control
• Press the POWER button to switch the radio on. ON will appear briefly on
the screen, followed by the current frequency and band selection.
• Press the
Vol.+/AL–1 or Vol.–/AL–2 button to control the volume:
Button
Vol.–/AL–2: quieter;
Button
Vol.+/AL-1: louder.
Switch on bass amplifier
• When the radio is switched on, press the BASS button to switch on the
bass amplifier. The screen will flash BASS.
• In order to switch the bass amplifier off again, press
BASS one more
time. The BASS message disappears.
Switch display message
• In radio operation press the MODE button to switch between displaying
the time and frequency.
- 22 -
GB/CY
To Next Page
Loading...
