Silvercrest Z30412-IT - Page 184

186 GB/MT
should start is displayed.
6. Repeat steps 4 and 5 to set the
minutes value.
7. Press the SET button
3
to confirm
your settings.
8. Press the FUNCTION button
2
. The
LC display
1
shows the PRICE 2
(2nd electricity tariff) display.
9. Repeat steps 3 to 12 in the section
on “Programming the electricity tariff“
to program the price per kWh for
tariff 2.
10. Press the SET button
3
to confirm
your settings.
11. Repeat steps 3 to 6 in the section
entitled “Programming electricity tariff
1 and 2“ in order to set the starting
time for tariff 2.
12. Press the SET button
3
to confirm
your settings.
66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 186 25.05.11 12:21