203 GB/MT
{Ensure that the current required for
the load is greater than 0.005 A.
z The energy cost meter shows
no value for energy cost.
The current is below the minimum
display range value of 0.005 A.
{Ensure that the current required for
the load is greater than 0.005 A.
No electricity tariff has been
programmed.
{Program the electricity tariff (see “Pro-
gramming the electricity tariff“, “Pro-
gramming electricity tariff 1 and 2“).
The switch-on duration of the energy
cost meter is too short.
{Check the energy cost again at a
later point in time.
66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 203 25.05.11 12:21
To Next Page
Loading...