204 GB/MT
Restoring the factory
default settings
As is the case with exposure to electrostatic
discharges, the device may malfunction if
it is exposed to a strong high-frequency
electromagnetic field. If these malfunctions
occur, e.g. the buttons do not work proper-
ly or the display is shown incorrectly, press
the R button
5
to reset the equipment to
the factory default settings. Use a thin,
pointed object to do this. The malfunctions
should then be eliminated.
IMPORTANT! Please note that this will
delete all the recorded data.
66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 204 25.05.11 12:21
To Next Page
Loading...