117
IT
ES
PT
GB
–
Safety stat trip
(fig. 5)
If the safety thermostat trips, the red
"35°C" led will start flashing. In order to
attempt a boiler restart, rotate the
selector knob to position ( ) and relea-
se immediately, returning it to the sum-
mer ( ) or winter ( ) position.
If the boiler lock-out occurs again, call
local authorised Service Centre for
technical assistance.
–
Other anomalies
(fig. 6)
When one of the red
“40÷80°C”
leds
start flashing, switch-off the boiler and
then try to ignite again.
After 2 or 3 unsuccessful attempts, do
not try again but call authorised techni-
cal staff.
Fig. 5
When the boiler is connected to the “Logi-
ca Remote Control” regulator, the selector
CR/OFF/SUM/WIN/UNBLOCK must be
placed in the position ( ); the knobs of the
hot-water service heating potentiometers
do not have any effect and all of the func-
tions will be managed by the regulator (fig.
7).
If the “Logica Remote Control” breaks
down, the boiler will function by placing the
selector on the ( o ), position, obviou-
sly without consequent control of the room
temperature.
No interior da tampa estão indicadas as
instruções de funcionamento (fig. 8). Cada
programação ou modificação é visualizada
e confirmada no display (fig. 9).
KEY
1 Display
2 Info button
3 Operating mode button: automatic operation
4 Operating mode button: manual operation
5 Operating mode button: availability
6 Cover with instruction compartment
7 Temperature knob
8 Presence button
Fig. 8
KEY
1 Display, time
2 Heating programme
3 Unit (%/C°)
4 Presence button display
5 External temperature
6 Ambient temperature
7 Holiday function
8 Operating mode
9 Line number/day
10 Burner on
11 Heating function
12 Domestic hot water/temperature/D.H.W. load
Fig. 9
Fig. 7
Fig. 6
FLASHING RED LED
FLASHING RED LED
To Next Page
Loading...
