Sime 25 BF - Page 30

122
IT
ES
PT
GB
Domestic hot water sensor fault
Call an authorised Service Centre.
67
68
69
70
192
193
195
Heating sensor fault (SM)
Call an authorised Service Centre.
Insufficient water pressure
Reset operation using the boiler charge valve.
Plant overpressure
Call an authorised Service Centre.
Safety thermostat trips
Call an authorised Service Centre.
Ventilator malfunction
Call an authorised Service Centre.
No communication between the "Logica Remote Control" and the boiler.
Call an authorised Service Centre.
1
0
– Error display
Ignition lock-out
Rotate selector CR/OFF/EST/INV/RESET on the "PLANET" control panel to the release posi-
tion
() to reset operation.
If the lock-out re-occurs, call an authorised Service Centre.
Safety thermostat trip
Rotate selector CR/OFF/EST/INV/RESET on the "PLANET" control panel to the release posi-
tion () to reset operation.
If the lock-out re-occurs, call an authorised Service Centre.