Simex MultiCon CMC-99/141 User Manual

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
7.7. GENERAL SETTINGS
The
General settings
menu allows to configure user interface display settings, the default
screen when the device powers on and automatic view change settings.
The parameters of the
General settings
menu are:
–
Basic
parameter block – this block includes two parameters:
•
Language
- this parameter allows the user to select the language, available
languages are: English, Polish, Spanish, German, Russian, French, Czech,
Romanian and Hungarian.
•
Date and time
- this parameter allows the user to set the current date and time,
•
Time zone
– the parameter which should contain the time zone where the
device works which allows to properly correct date and time in the device,
•
Reg. num. displaying
- this parameter allows to change the mode of displaying
the Register addresses for
Logical channel
and
External output
menu. Two
formats are available:
◦
hexadecimal
- the registers are displayed in the hexadecimal format. To
indicate that data has a hexadecimal format, the letter '
h
' is added at the
end - for example, 12h (0x12),
◦
decimal
- the registers are displayed in the decimal format (without any
marker) e.g. 123
–
LCD screen
parameter block:
•
Backlight
- this parameter allows the user to set the level of the LCD backlight.
Available levels are:
20%
(the least backlight),
40%
,
60%
,
80%
,
100%
(the most
backlight),
–
Screen saver
parameter block - these parameters can reduce the backlight level of
the LCD screen (or make it completely blank) during normal operation, i.e. when the
user does not touch the screen for a set time. This block has two parameters:
•
Mode
- this parameter has the following options:
71
Device configuration
MENU
Logical channels
Built-in inputs
Built-in outputs
External outputs
Profiles/timers
Controllers
Groups
Modbus
Network settings
Access options
Printouts
E-mail notifications
Device configuration
MENU
Logical channels
Built-in inputs
Built-in outputs
External outputs
Profiles/timers
Controllers
Groups
Modbus
Network settings
Access options
Printouts
E-mail notifications
General settings
General settings

Simex MultiCon CMC-99/141 Specifications

General

Brand	Simex
Model	MultiCon CMC-99/141
Category	Controller
Language	English