Simmons 25507 - Bassinet Frame Assembly and Leg Extension; Secure Frame Components; Extend Bassinet Legs

6
Customer Service: (646) 435-8726
www.DeltaChildren.com
Left Side
Frame Stand
BASSINET FRAME ASSEMBLY & LEG EXTENSION
1
B
A
Fully extend both sides of the bassinet legs by pressing
the button located on top of the bassinet legs and
pull outward to fully extended position (Fig. 1E).
A
B
Insert support bar to the left side frame stand (Fig. 1A).
Secure with the two screws (Fig. 1B). Use the wrench to
tighten screws in clockwise direction (Fig. 1C). Repeat for the
right side frame stand. Make sure frame is in a fully locked
position (Fig. 1D) pull outward on left and right side frames.
Right Side
Frame Stand
Bottom Cross
Support Bar
Fig. 1A
Insert support bar into
side frame stand
Fig. 1B
Secure side frame
stand and support
tube with screw
Fig. 1C
Tighten screws with
wrench clockwise
Fig. 1D
Bassinet frame fully
locked position
Fig. 1E
Bassinet frame fully
locked position