26
Manually Switched Rebroadcast Mode
Probably the easiest and most efficient method of implementing
vehicle comms and rebroadcast from a pair of SRM9000 radios.
This configuration doesn’t rely on programming of the radios in order to achieve
switch-over from standard vehicle comms to rebroadcast. Instead it uses a basic
change-over switch which, when operated, powers both the secondary radio and the
aerial change-over relay. It requires only a switch on the dash of your vehicle which is
labelled ‘Normal Comms / Rebroadcast’ or however you want to phrase it.
For it’s ease of implementation and use, this method has a lot to commend it.
To Next Page
Loading...
