30
Extending the Capabilities of the Standard Repeater.
At this point there are hopefully enough options for you to select one you think will suit
the needs of your team. Most of those requiring buttons to be programmed on the
control head can also be used with simple dash-mounted switches. It’s perfectly possi-
ble to mix and match the methods used in each of these examples. This is already a
large document, there wasn’t room to include all the variations!
If you’re happy with one of the suggested solutions then I’d strongly recommend you
get it up and running before going any further. The next section includes some addi-
tional suggestions for enhancing what you now have, hopefully, a working, vehicle
mounted, rebroadcast system.
To Next Page
Loading...
