Simon | 100 iOUser Guide24
The HUB will emit another
Wi-Fi signal, connect to it
so that you can continue
with the configuration.
Note: This is another Wi-Fi
source that does not have
internet, so your mobile
device may notify you to
change the network. Do
not change it and ensure
that you remain connected
to HUB_xxx
-2- -3-
If you do NOT have Wi-Fi when performing the installation or want
to configure remote access later, click on “No”.
-1-
1 2 3 4 5 6 7 8 9
To Next Page
Loading...