Damage due to polarity reversal
This product contains electronic components that may be
damaged by reverse polarity of the power source.
Do not reverse the polarity of the voltage source (batter-
ies or mains adapters).
Operational malfunction due to radio interference
This product may be affected by electromagnetic or mag-
netic interference.
Do not mount or place the product directly next to
devices that could cause electromagnetic or magnetic
interference (switching power supplies!).
Communication interference due to metallic surfaces
This product communicates wirelessly. Metallic surfaces
can greatly reduce the range of the product.
Do not mount or place the product on or near metallic
surfaces.
NOTE
Intended use
SimonsVoss-products are designed exclusively for
opening and closing doors and similar objects.
Do not use SimonsVoss products for any other
1. General safety instructions 20 / 100 | EN
To Next Page
Loading...
