use & care
• Clean your sensor mirror with
a microfiber or lens-cleaning
cloth or a simplehuman
microfiber mitt.
quick start
• Press the on/off power button located
on the base of the mirror.
• For maximum efficiency, always leave
the mirror in “on” mode.
• The sensor will automatically activate
the light ring when you get close.
turn on charge
• Plug in the USB adapter.
• The indicator ring will pulse green
while charging and turn solid green
when fully charged.
• The indicator ring will glow red when
mirror needs to be recharged.
Note: Before the first use, fully charge
the mirror with the simplehuman USB
adapter provided. This may take up to 7
hours, and one charge will last up to 5
weeks with moderate use.
To Next Page
Loading...
