Simplex 2120 - Removing Simplex 2120 Equipment from Cartons

Interface Operation
The 2100/2120 Interface scans the 2100 encoders in numerical order, configuring them into 2120 transponder
slots from the lowest to the highest encoder address (missing addresses are ignored). All monitor points appear
on the first address; all control points appear on the second address.
Example: A 2100 transponder cabinet on channel 1 contains encoders 00, 01,02, 07, 08.
The 2120 transponder addresses to be assigned to this cabinet are 105/l 06.
Under the above conditions, point relationships are as follows:
ENCODER
2100 MON. PT. 2120 PT.
00
l-4 105101 THRU 105104
01 5-8 105-l 05
THRU 105-l 08
02 9-12 105-201
THRU 105-204
07 29-32 105-205
THRU 105-208
08 33-36 105-301 THRU 105-304
ENCODER 2100 CTL. PT.
I
2120 PT.
00
01
02
07
08
1 106-l 01
2 106-l 02
3 106-l 03
4 106-l 04
5 106-261
6 106-202
7 106-203
8 106-204
9 106-30 1
22 106-302
23
106-303
24 106-304
25
26
27
106-401
106-402
106-403
106-404 (unused)
a
,Simplex
‘Ed 12 88
MUX1 -21-300 (574-453)
Technical Manuals Online! - http://www.tech-man.com