Simplicity 5212 - Page 29

Adjustments
rotate. (When moving the set collar, 4. Adjust drive pulley belt stops as fol-
be careful not to move the rod.) lows.
A.
B.
C.
D.
E.
F.
Nut G.
Clutch Rod Guide
Slot (in brake rod guide)
Brake Rod Guide H.
Set Coliar
Spring 1 . Brake Rod
Nut J.
Clutch Rod
Idler Pulley
K.
Hole, 3/4" Dia.
There should be 1/8 inch (3 mm) be¬
tween each belt stop and the belt when
the tractor clutch is engaged (pedal up).
See figure 33.
25