en
Lubrication
Figure 32. Arbor Lubrication Points
Figure 31. Mower Deck Lubrication Points
Lubricate the unit at the locations shown in F
as well as the lubrication points listed.
• Generally, all moving metal parts should be oiled
where contact is made with other parts.
• Keep oil and grease off belts and pulleys.
• Wipe surfaces clean before and after lubrication.
NOTE: Use grease fittings when present. Automo-
tive lithium grease is recommended.
Figure 30. Tractor Lubrication Points
Models with grease fittings:
Lubricate with grease gun.
Lubricate the areas shown
with engine oil.
Apply grease with a brush
to areas shown.
29
To Next Page
Loading...
