Prestige, Conquest, & Broadmoor Series
1/2003 11
TP 300-2534-02-PR-SMA
Lubrication
Lubricate the unit at the locations shown in Figures 22-
26 as well as the lubrication points listed. Generally, all
moving metal parts should be oiled where contact is
made with other parts. Keep oil and grease off belts and
pulleys. Wipe surfaces clean before and after lubrica-
tion.
Grease:
• steering linkage
• foot pedal
• mower linkage
• transmission idler assembly pivot
• rear axle shafts (remove wheel hubs)
Use grease fittings when present. Automotive lithium
grease is recommended.
Oil:
• control linkage
• seat adjustment assembly
• brake linkage
• mower deck height adjustment linkage
• manual lift lever
Figure 22. Lubricating the Tractor
Figure 24. Mower Lubrication Points
Figure 26. Arbor Lubrication Point
Figure 23. Lubricate Steering Linkage
Figure 25. Mower Lubrication Points
To Next Page
Loading...
