Need help?Do you have a question about the Simplicity SAC5250 and is the answer not in the manual?
General| Brand | Simplicity |
|---|---|
| Model | SAC5250 |
| Category | Air Conditioner |
| Language | English |
Disconnect power before installing or servicing to prevent personal injury.
Position the air conditioner cabinet into the window with specific channel alignment.
Steps to remove the air conditioner slide-out chassis from the cabinet.
Position the air conditioner cabinet into the window with specific channel alignment.
Align cabinet holes with bracket holes and secure using provided screws.
Ensure cabinet is slanted slightly downward on the outside for proper drainage.
Cut and attach foam sealing strip to the underside of the bottom window sash.
Install 'L' shaped top channel and 'U' shaped bottom channel to the cabinet.
Slide shutters into channels and attach them to the cabinet using screws.
Install leveling screw brackets and align them with window sill marks.
Adjust leveling screws to tilt brackets slightly downward to the outside.
Slide the air conditioner back into the cabinet and reinstall security screws.
Position the front panel assembly, ensuring lock tabs engage retaining slots.
Install the air filter after reassembling the front panel.
Check for air leaks and seal where necessary around the window and unit.
Attach a drain hose to redirect excessive condensation if needed.
Do not leave unit unattended in spaces with people or animals unable to react to failure.
Disconnect power before installation or service to prevent electrical shock.
Check power connection, fuse/breaker, or selector switch position.
Check filter, unit size, or obstructions; reset tripped compressor.
To Next Page
