Simplicity SMF2 - Attach Tube Assemblies

6903-002002 <01>
11
1-5
For the large interface only. If using the smaller interface [05], proceed
to step 2.
1. Be sure carraiges (C) are lined up to allow the tube assemblies [06] to
pass through. Insert tube assemblies [06] into brackets [01, 02, 03].
2. Tighten carraiges (C). Do not overtighten!
1
2
6x
[06]
[06]
[06]
[01]
[28]
(C)
[03]
[02]
[01]