ZT4000 - 44” & 48” Mower Deck
www.simplicitymfg.com2
Quick Setup List
Page Setup Procedure Steps to Perform
3 Uncrating
❏ Remove Crate & Banding.
❏ Loosen Hydraulic Release Valves.
❏ Release Parking Brake and Roll Tractor forward off skid.
❏ Tighten Hydraulic Release Valves.
3 Connect Battery Cables
❏ Connect Battery Cables.
4 Tractor Assembly
❏ Assemble the Ground Speed Control Levers.
❏ Assemble the Seat.
❏ Connect the Seat Switch Harness.
6 Roll Bar Assembly
❏ Assemble the Retainer Pins.
❏ Assemble the Top Loop.
❏ Install the Roll Bar.
8 Check Fluid Levels
❏ Check Engine Oil Level.
❏ Check Hydraulic Oil Level.
❏ Check Tire Pressure
9 Check Mower Assembly
❏ Check Blade Bolt Torque
❏ Check and Level Mower Deck
❏ Check Deck Drive Belt
12 Lubrication & Fuel Preparation
❏ Lubricate all grease and oil points.
❏ Add fuel.
❏ Start the Engine.
13 SAFETY CHECK
❏ Check for LOOSE HARDWARE.
❏ Check all OPERATOR CONTROLS.
❏ Perform SAFETY INTERLOCK SYSTEM CHECK.
Register Product
To register the product: log onto www.thepowerportal.
com, select the appropriate brand, click “My Resources,”
select the “Product Registration and Rebate” icon and
then the “New Product Registration / Rebate” tab. Fill out
and submit the online product registration form.
Setup Procedures
To Next Page
Loading...
