Simrad Naviop Loop M - The settings dialog; Edit channels;output settings

| 23
Conguration | Loop M User Manual
C Home screen description
Used to enter shipyard specific text shown on the Naviop home page.
The settings dialog
B
A
A Loop type
Define the type of the installed system.
M: one Egon+ board.
M+: two Egon+ boards.
S/S+ shall not be used for Loop M systems.
B App name
Specify a name for the configuration. The name is used to identify the configuration to be
used by the MFD.
Edit channels/output settings
DB C F HG
A
E
A Egon+ board(s)
Select the Egon+ board you want to configure (for configuration with two Egon+ boards).
B Output/Channel number
Indicates the output associated to the row.
C Fuse/relay identication
Indicates the Fuse/Relay associated to the channel/output.