Need help?Do you have a question about the Simucube 2 Sport and is the answer not in the manual?
General| Torque | 17 Nm |
|---|---|
| Connection | USB |
| Compatibility | PC |
| Type | Direct Drive Wheelbase |
| Maximum Slew Rate | 4.8 Nm/ms |
| Power Supply Type | External |
| Communication Interface | USB |
| Update Rate | 1000 Hz |
| Wireless Wheel Support | Yes |
| Encoder Resolution | 22-bit |
| Encoder | High-resolution optical encoder |
Instructions on safe usage of the Simucube 2 device.
Instructions for mounting the Simucube 2 motor on a simulator rig.
Details of the first mounting option for the Simucube 2 device.
Details of the second mounting option for the Simucube 2 device.
Instructions for assembling the Simucube Quick Release wheel side.
Guide for 50.8 mm PCD front mounting without a spacer.
Guide for 50.8 mm PCD front and rear mounting with a spacer.
Guide for 70 mm PCD front and rear mounting with a spacer.
Information on 70 mm PCD mounting without a spacer.
Guide for adjusting the tightness of the Quick Release pin.
Instructions for disassembling the SQR motor side.
Steps for assembling the motor side of the SQR.
Further steps for assembling the motor side of the SQR.
Final steps for reassembling the SQR motor side.
Instructions for downloading the Simucube 2 True Drive software.
Guidance for initial startup and user interface overview.
Explains how the Simucube 2 enters idle and standby modes.
Information about potential beeps and notifications during initial tests.
General status information and controls in the True Drive Overview tab.
Details on connecting and using Simucube Wireless Wheels.
Steps for connecting a Simucube wireless wheel.
Procedure for disconnecting a Simucube wireless wheel.
Safety features related to wireless wheel disconnection.
Explanations for the status LED on Simucube Wireless Wheels.
Information on low battery warnings for wireless wheels.
Overview of the primary functions within profile settings.
Description of the simplified profile settings interface.
Detailed explanation of settings available in Simple Mode.
Adjust profile name, overall strength, and steering range.
Configure bumpstop feel and adjust its range.
Settings for core filters affecting FFB feel and stability.
Filters for inertia, force reduction, slew rate, and latency.
Tuning for DirectInput effects and advanced/early access filters.
How the hands-off detection feature works and is configured.
Controls device status beeps, excluding safety-related ones.
Resets FFB device state when simulator crashes.
Displays firmware status for development and troubleshooting.
Functionality for debugging and troubleshooting.
Option to password protect profile settings.
Explanation of LED colors and blink codes for normal operation and firmware updates.
LED status during firmware update procedures.
Troubleshooting unexpected beeps related to torque saturation.
Troubleshooting beeps from automatic hands-off detection.
Resolving issues where Simucube is not found during firmware upgrade.
Solutions for True Drive software hanging upon startup.
To Next Page