Sinar f2 - Page 14

Final
points
Maintenance
Cleaning
Resetting
the
drives
Cleaning
lenses, filters
and mirrors
Warranty
Further
instruction manuals
The
plastic
guides
and
slide bearings
of the
SINAR cameras
are factory-
lubricated
and require
no oiling or
other lubrication.
Dust,
sand,
etc.
can
however
cause
heavy wear.
So when the
outfit is in
use
protect
it with
SINAR
dust covers.
When
required,
clean soiled rubber
linings
on the
control knobs
with
soapy
water.
Through
wear,
excessive
strain or dirt the
drives
may need readjustment.
This
can
be carried
out by
your
local
agency
or by
SINAR LID.
Lenses,
glass
filters
and
SINAR surface-coated
mirrors
should
only
be
cleaned
with
agents
specially recommended
for
lens
cleaning
-
e.g. Kodak
Lens
Cleaner
and suitable
cleaning tissues.
Use the 542.79
SINAR filter
cleaning set for
cleaning the
SINAR
COLOR
CONTROL filters.
The
supplier
guarantees
new
equipment for
12 months
from
the invoice
date.
The warranty
covers the
use
of material faults
and operation.
The
supplier
undertakes to
rectify
immediately
and at his
own expense
any
damage
and
faults that
become
apparent
on the
SINAR camera
and/or its
accessories
through
failure
to
meet the
above
specifications.
The
warranty
covers
no
claims beyond
this,
nor
consequential
damages. lt
becomes
invalid in
the
case
of alterations
or repairs
carried
out by the
customer
or third
parties
without
the
written
agreement
by
SINAR LID.
Separate
instruction
manuals
are available for
the following
SINAR
cameras
and accessories.
Order from
your
local
agency or
from
SINAR LTD:
SINAR/COPAL
shutter
SINAR DIGITAL
shutter
Module
1
and 2
SINAR cases
SINAR rollfilm
holders
SINAR sheet
film holder
SINAR booster
1
Lenses with
spring-loaded
SINAR aperture
control
SINAR
metering
backs
All the
subjects
mentioned
in this
instruction
manual
are
covered in
deoth rn
"THE
I-ARGE
FORMAT
-
a handbook
on the
SINAR
system".
SINAR AG
CH 8245 Feuerlhalen/Switzerland
Telephone +41152647 07 07
Fax +41152 647 06 06
E-mail
sinar@sinar.ch
Website www.sinarcameras.com
Printed in
Switzerland
Technical modifications
and availability reserved
937.04105.41,000.5 e
-
02.2102
O SINAR AG,
Switzerland
$nar